community-content

Forum Replies Created

Viewing 15 posts - 3,376 through 3,390 (of 9,648 total)
  • Author
    Posts
  • in reply to: Need Suggestion on Using BizTalk #21441

    Thanks a million for your inputs !

    in reply to: Updategram – Updating Multiple rows #21440

    Hi Rob,

    Have you managed to update the rows? Well I have managed to some extent but because of the polling problem the SQL adapter reads the same rocords multiple times and which causes the problem?

    If experience the same problem how did you managed to get that sorted? Can you share on this please?

    Thanks,

    Kishore

     

     

     

    Interesting issue. If you could add a little more clarification as to the file being parsed that would be helpful.

    i also dont recall a 2220 loop in this schema, so, i am going to assume that you are referring to the 2200D and E loops (subscriber and dependent) which are controlled by the parent 2100D and E, that are controlled by the NM1 01 qualifier. Anyway, with that jabble out of the way, you can change the REF and DTP segments (which repeat) to choice rather than sequence, but if they decide to send a REF then a DTP then a REF etc, thats a little more complex. Youll need to have the two nodes as choice but repeating, which wouldnt really work if its haphazard.

    But, with my experience in Healthcare and with the 277, the client probably wont do that, they probably miscoded the file to be exactly the same everytime (except for whether or not they will have a dependent), so i would suggest customizing a schema for them and make it more rigid (ie, always returns in their sequence) and use the standard schema for everyone else. then you would map the resulting message to the standard 277 schema and feed it through your current process.

     

    Hope that helps. if not, please include a snippet of EDI (dont forget to remove and PHI)

    in reply to: Architechture question #21438

    Have you tried adding a parallel shape and calling the call orchestration shapes and putting all of that in a transacted scope?

    in reply to: Need Suggestion on Using BizTalk #21437

    Tushar,

    Well, to be totally honest, I wouldnt use BizTalk in this particular scenario. I say that based on:

    A- you need to run the code as a scheduled event. Well, you need other code to trigger BizTalk to wake up and process this data.

    B- What will probably happen is that youll be calling these snippets from helper classes that you would either place in an orchestration or a pipeline etc. This isnt utilizing the engines effeciently as you will be dehydrating everything for half a day and just calling them and recieving the results.

    C- You seem to be doing batch processes that run in a transaction. This sounds like a perfect scenario for a SQL job. (now im not an Oracle expert, but im sure there is something there like that)So what you will be  doing is licensing SQL as well as BizTalk and not really utilizing BizTalk unless you refactor the code and make it run in a single message-based scenario, where BizTalk would be perfect.

     

    Hope that sheds some light on the issue

    Anyone ever figure anything else out with this?  Restarting the WMI does work for me, but I hate doing this on a production box every few days.  Thanks,

     

    John S

    in reply to: Is the FTP adapter is support FTPS (ftp over SSL)? #21432

    Check FTPS adapter for BizTalk, which together with SFTP adapter is included in SecureBlackbox for Business Servers

    in reply to: is FTPS Adapter supported? #21431

    You might want to try SecureBlackbox for BizTalk and it’s SFTP adapter for BizTalk.

    in reply to: Connect sFTP using Biztalk Server 2004 #21430

    You do need a third-party component (adapter) for SFTP in BizTalk.

    Please check SecureBlackbox for BizTalk, it provides adapters for both SFTP (SSH File Transfer Protocol) and FTPS (FTP-over-SSL).

    in reply to: Error with BizTalk Http Adapter and Custom Pipeline Component #21429

    Aaah, the GetOriginalDataStream-method. Of course, when you mention this, I recall using the method, not where I’ve used it or why though but now I know.

    Thanks for posting the answer here.

    Happy bts:ing!

    //Niklas

    Hi sir…
    I have solved my WCF service issue realted to passing the value….now i want to receive the response from WCF service after send the request……i m sending the request through the request message multi part generated by service…but at the response side i m geting the response in list……i m not sure that biztalk will accept this thing becz at the response side i m using response message multi part generated by service……i m using the expression shape for timebeing after each step in orchestration to check the stage where i m getting the error.
     
    The request is going to WCF service but response time it gives the error. I m using the following steps in orchestration.
     
    ** For request i have manually created the schema same as the request format of the datacontract
     
    Receive Shape 1 –> Source Schema Message (** Manually created by me same as request format of the data contract)
     
    Transform Shape –> Transform the Request into service endpoint function (Source Schema to data contract schema)
     
    Send Shape –> Request Message (Multi-Part Message Type Generated by service for that data contract) ..this shape is attached to the request port in orchestartion which i have generated by using existing port type for that particular service endpoint
     
    Receive Shape 2 –> Response Message (Multi-Part Message Type Generated by service for that data contract)…. through this receive shape i m receiving the response..
     
    it give me error as:
     
    Inner exception: Received unexpected message type ‘http://…..’ does not match expected type
     
    I m not getting that is there any problem in my request format (which i have created manually)…..or there is mismatch in response format becz i m geting the values in list…
     
    Is i m following the right steps?
    Please guide me on the same as soon as possible..
     
    Thanks
    Girish
    in reply to: Error with BizTalk Http Adapter and Custom Pipeline Component #21427

    I created a MS trouble ticket for this issue and we were able to identify the problem.

    In the custom component code’s Execute method I was grabbing the <inputmsg>.MsgPart.Data property and checking for length etc.  The file adatper implements the Data property as both a getter and setter.  The http adapter on the other hand only implements the setter.  Hence the error message.  To get the data you need to use the call the GetOriginalDataStream method.

    Hope this helps anyone else who runs into this inconsistency.

    Geordie

    in reply to: new to biztalk ?? #21424

    BT is like chess, each piece has a set of rules that define what it is capable of doing. I would highly recommend it, as microsoft is supporting this platform. Many of the new platforms in development stem from the roots of BT.

    BizTalk is a BPEL engine that allows routing messages to disparte data sources and systems, it converts messages into xml and process through either message based routing or workflows(orchestrastions). BT’s strength is in long-running transactions, the case when you are not sure when the connected systems will reply or human interaction is required.

    BT also supports all the plumbing for administration, logging, error handling, etc. You can do anything in C#, but you have to remember to do everything, everytime as well. Forget to catch the exception, implement serilization, close the connection, blah.

    In Bt you get a suspended message that can be resumed if you missed something, most people would like to hear you “lost” thier order, and tell them to try again. 

    Go for it, BT rocks. 

    in reply to: Controlling orchestration instantiations #21421

    I don’t know whether this is what you’re after, but Stephen W. Thomas (the chap that runs BizTalk Gurus) has a sample which demonstrates controlling the concurrent number of orchestrations – see http://www.biztalkgurus.com/media/p/15499.aspx

    Hope this helps, Nick.

    in reply to: How could I generate schema using COVAST EDI Accelerator #21418

    Unfortunately, it isn’t quite as simple as the above poster implies, or as simple as using the EDI schemas in BizTalk 2006 R2….

    You first need to download the relevant schemas from Covast.com and load them into the Covast EDI Studio which will generate the relevant Xml representation; next through the Add Generated Items -> Add Adapter Metadata option in Visual Studio import the Covast Xml representation as a schema into your project and use as if it were a ‘normal’ schema.

    When you receive an EDI message through the Covast Adapter on a Receive Location, Covast will translate the EDI message into the Xml representation created earlier and drop into the MsgBox ; for sending, create an Xml message that conforms to the schema and send it over a Send Port that has the Covast EDI Adapter – Covast will take the Xml messsage and transform into EDI.

    I would suggest thoroughly reviewing the Covast Help Documents and possibly subscribing to a Covast course (I took one back in 2004 and it was invaluable).

    Nick.

Viewing 15 posts - 3,376 through 3,390 (of 9,648 total)