community-content

Forum Replies Created

Viewing 15 posts - 766 through 780 (of 9,648 total)
  • Author
    Posts
  • in reply to: Create Positional Flat File #25475

    Hi sbrown63,

     

       I have created a BizTalk sample project for you, just click on my avatar on BizTalkGurus website, go to the section My Files on my profile page on the right hand side, click on the link View All Files, and look for the zipped file sbrown63.zip and download it to your local machine. When you unzip the file, it will create a project location with all the BizTalk artifacts. You only need to provide your own assembly key file (containing both public and private keys) to strongly name your assembly before deploying it.

     

       To test this application (a message routing-only scenario), in BizTalk Server Administration console, create a one-way Receive Port with a Receive location (of Transport Type equal to FILE and Receive Pipeline equal to Xml Receive) and a static one-way Send Port with the following settings:

    1. Send Pipeline will be assigned the custom send pipeline containing the flat file assembler component (deployed from the project).

    2. Outbound Maps tab will have one entry which is the custom map (mapping the XML schema to the Positional Flat file schema) deployed from the project.

    3. A destination folder with a valid path where your positional flat file will be output.

     

       Once your Send Port and Receive Location are enabled in the administration console, you can use the provided InputXml.xml file (from the project) and drop it into your receive folder location and see the output positional flat file as a result.

     

       Hopefully, this approximates what you are looking for…

     

       Daniel.

     

    Hi,

    No, After I installed certificate on my machine, actually who defined this stuff – is someone else, but I googled, and found this article – it’s the direction to check:

    http://msdn.microsoft.com/en-us/healthvault/bb814945.aspx

    Not in adapter, but on the machine. But, maybe the definitions you work – are other than mine.

    Thanks for the reply. Do you remember where you had to set this key? For instance we’re using a wcf adapter custom binding, and we’ve defined the public key of the service under the ServiceCertificate inside of the Behaviors > ClientCredentials extension. Does that ring a bell?

    in reply to: Filter for Different Messages comming to a single folder #25472

    Hi,

    5 types of different Messages are comming to a FTP folder. I have already impleneted the Orchestrations for all 5 types of Messages asuuming that the messages are comming to 5 different folders.

    Now the requirement got changed. And i will have only one folder and i need to take the appropriate message to the appropriate orchestration. I mean my Orchestrations should pick the appropriate message from a single folder. How to do this?

    The thing is, in all the incomming messages there is unique field, which let me know which orchestration shoud pick up the message. So i think I can do the distinguised property promtion for that perticular filed. but dont know how to set this for the receive shape filter expression properties.

    Please help me.

    Thanks A Lot In Advance

    in reply to: Failed to connect to the SQL database SSODB on SQL Server #25471

    It works fine. Thank you

    in reply to: Publishing orchestration as WCF not in C:\Inetpub\wwwroot #25470

    Solved by myself 🙂 It is possible.

    If anyone needs explanations – I’ll post it to my blog.

    in reply to: XLang error when I deploy the DLL to staging server #25468

    It happens – sometimes some reference is not updated properly. You know, BizTalk stuff 😉

    I work sometimes at home on VPC – it works regulary, with no problems as it was real PC.

    in reply to: XLang error when I deploy the DLL to staging server #25467

    Sorry..I did not logged in and poste the message. It appeared as Anonym.
    I logged in and here is the updated message.

    think I figured out to have work around.

    GAC is in assembly; restart of host has already been done.
    Local testing of maps works fine and same code build from other systems also works fine. It seems that the issue on softwares installed in my machine.

    I infact build the virtual PC with WIndows XP, .net 2003, Biztalk 2004, SQL Server 2000. After all these installation in Virtual PC, I build the code. Deployed into our staging environment and it works fine without any XLANG error.

    Strange..I did not know the root cause but using virtual PC worked; Sometimes better to have workaround rather than finding the root cause.

     

    in reply to: XLang error when I deploy the DLL to staging server #25466

    I think I figured out to have work around.

    GAC is in assembly; restart of host has already been done.
    Local testing of maps works fine and same code build from other systems also works fine. It seems that the issue on softwares installed in my machine.

    I infact build the virtual PC with WIndows XP, .net 2003, Biztalk 2004, SQL Server 2000. After all these installation in Virtual PC, I build the code. Deployed into our staging environment and it works fine without any XLANG error.

    Strange..I did not know the root cause but using virtual PC worked;

    in reply to: Executing BTAHL7ReceivePipeline in an orchestration #25465

    Hi Mihai Dan,

    With all  appreciation I read your  reply in Biztalk Guru Blog  regarding Executing BTAHL7ReceivePipeline and the resolution  you have suggested  looks like  to  fit my requirement and if is this some thing  you be able to help me and advice how i can proceed further,with your reply I will be looking forward  to.

    Here is my email Contact  [email protected].

    Hope to hear  from you ASAP.

    Expecting you help and appreciate you advice.

    Thanks

    Raj

     

     

     

     

     

    in reply to: separating SQL Server from BIZTALK #25463

    On BizTalk side.

     

    in reply to: Oracle EBS Filter Issue #25462

    Thanks Daniel for quick response. However, solution I am trying is from BizTalk and according to the documentation (see links below) Filter clause should work in xml. I am not sure if it does not work because I am using Filter clause against the View. But I don’t think that is the problem. Even Request XML looks like what it is supposed to be.

    I am not really sure what the issue is. If xml had issue, it would not return resultset of all the rows when I pass empty Filter.

    http://msdn.microsoft.com/en-US/library/dd788338(v=BTS.10).aspx
    http://msdn.microsoft.com/en-US/library/dd788326(v=BTS.10).aspx

    in reply to: Oracle EBS Filter Issue #25461

    Hi,

     

       Check the following MSDN article on how to use the Oracle E-Business Adapter to create and publish a WCF service, particularly the section titled “Modify the .cs file”:

     

    http://msdn.microsoft.com/en-us/library/dd788356(BTS.10).aspx

     

       Hope this is helpful in resolving your issue.

     

       Daniel.

     

    The following note on this site helped me reslove the issue. I simply added the registry keys under the Wow6432Node branch and was able to add the adapter.

    Note
    For a 32-bit adapter, the BizTalk Server Administration Console uses the HKEY_CLASSES_ROOT branch in the registry to obtain custom adapter configuration. If a 32-bit adapter is installed on a 64-bit server, the BizTalk Serve Administration Console instead uses the HKEY_CLASSES_ROOT\Wow6432Node\ branch for adapter configuration data.

     

    Thanks xman71 !!!!  

    Hi sbrown63,

     

       Check the following MSDN article to see if it’s helpful in resolving your issue.

    http://msdn.microsoft.com/en-us/library/aa561871.aspx

     

       Daniel.

     

Viewing 15 posts - 766 through 780 (of 9,648 total)