community-content

Forum Replies Created

Viewing 15 posts - 3,466 through 3,480 (of 9,648 total)
  • Author
    Posts
  • in reply to: Dehydtarted message? #21299

    Self-Correlation doesn’t work like it might sound, it’s designed to work in Orchestration to Orchestration scenarios and not really request-response. 

    What you need to do, is initialize a Correlation and set a value.  Then use a Receive Shape to follow that Correlation.  Make sure the value you use is promoted on the response message.  Typically, this would be an ID or something else inside the message and you could use a property schema to promote the values.

    Thanx, just did it, but it ain’t working.

    In subscriptions – I can see the two values I am subscribed to – ReceivePortId & Message type.

    After I changed using Receive Pipeline to Xml receive – I can see in suspended message those ( the very same values ) values, but the orchestration stays in dehydrated mode, and the suspended message stays suspended :))

    BTW: I work with Bts2006, though this fourm is for BTS2004, the problem actually is the same.

     

     

    Use XML Recieve pipeline.

    in reply to: BizTalk BAM Prerequisites #21285

    I’m not too sure whether Biztalk BAM needs WSS or MOSS, but however I do know that WSS 2.0 is a pre-requisite for BizTalk installation. Without it, the installation may not be smooth.

    in reply to: DeliveryNotification for Direct port #21278

     any good article or sample of this?

     But keep in mind that SQL Adapter operations are not enlisted with current transaction…

    That is your Inserts and updates (done with SQL adapter) won’t be rolled back on error.

    Use Custom Code to acheive SQL transaction support.

     

    Not sure about what you are interested in.

    But try to use SQL adapter. Create BizTalk project in Visual Studio and use SQL adapter special wizard (in VS) for generating Ports and Schamas for Database table Insert and Update operations.

    in reply to: How to config/costom a WS Security to SOAP header #21273

     Hi Ryo,

    I have similar situation like yours. The Biztalk can not received the response without security header part in place. It is seem because Biztalk try to maintain consistency upon sending the message and get response. Currently I am using WCF basicHTTP which is not give me properties say “relax the security for response”.

    So Perhaps if you could try just copy the sender security header to be security section for response.. May be that is what Biztalk wants..anyway it just an idea..

    mandyk

     

    That is not English…

    Correct it.. I cannot understand what you want.

    in reply to: Multiple Receive Shapes with timeout #21270

     No problem. [Y]

    I wonder How You know about correlation set, and don’t know about listen shape.

    All books on BizTalk give chapters on Shapes before chapters on Correlation sets.

    in reply to: Multiple Receive Shapes with timeout #21269

     

    Thank you very much boss.

    Its working.[:)]

    in reply to: Multiple Receive Shapes with timeout #21268

     I tried as you said above but I received following errors: use of unconstructed message ‘Message_2’,  #error:  “Errors exist for one or more children

    In right branch of listen shape i took the delay shape, and expression shape.

    can you please check it onece

    in reply to: Multiple Receive Shapes with timeout #21267

     So u have one port and three receive shapes fed by the port.

    in reply to: Multiple Receive Shapes with timeout #21266

     Ok. that is clear. You have a single Receve port.

    Orchestration should start with Receive shape accepting message from the port. It initalizes Correlation.

    Then goes Listen shape. The first branch of the Listen shape has two, coming one after anothe Receive shapes. These receive shapes will accept second and then third message from the port. They both should have [Follow correlation set].

    The second branch of the Listen shape should have TimeOut shape with 10 minutes. and after that timeout shape you should have some Code shape (or whatever) that will  set property of your orchestration  TimedOut = true;

    (Of course you should create bool TimedOut  varable in orchestartion designer)

    After listen shape you can check the TimedOut  property and do some action.

     

    The Listen shape… has several branches.. Actions in all branches are being performed simultaniously, but if some branch finishes execution others branches  are terminated and execution goes on in orchestartion.

    in reply to: Multiple Receive Shapes with timeout #21264

     

    Yes.

Viewing 15 posts - 3,466 through 3,480 (of 9,648 total)