community-content

Forum Replies Created

Viewing 15 posts - 3,001 through 3,015 (of 9,648 total)
  • Author
    Posts
  • in reply to: Envelope Schema #22055

    Open your envelope schema and select the <Any> element. Set MaxOccurs = Unbounded and Process Contents = Skip

    in reply to: help on port on biztalk 2004 #22051

    this is a part of my binding file

    <?xml version=”1.0″ encoding=”utf-8″?>
    <BindingInfo xmlns:xsd=”http://www.w3.org/2001/XMLSchema” xmlns:xsi=”http://www.w3.org/2001/XMLSchema-instance” Assembly=”Microsoft.BizTalk.Deployment, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35″ Version=”3.0.1.0″ BindingStatus=”FullyBound” BoundEndpoints=”7″ TotalEndpoints=”7″>
      <ModuleRefCollection>
        <ModuleRef Name=”OrchestrationA” Version=”1.0.0.0″ Culture=”neutral” PublicKeyToken=”ef98d6e5e930a67b” FullName=””>
          <Services>
            <Service Name=”OrchestrationA.Controleur401″>
              <Ports>
                <Port Name=”PortReceiveControl” Modifier=”2″ BindingOption=”1″> ”logical port
                  <SendPortRef xsi:nil=”true” />
                  <DistributionListRef xsi:nil=”true” />
                  <ReceivePortRef Name=”RecvTrans401″ /> ”physycail port
                </Port>
              </Ports>
              <Roles />
              <Host Name=”BizTalkServerApplication” NTGroupName=”BizTalk Application Users” Type=”1″ />
            </Service>
          </Services>
        </ModuleRef>
      </ModuleRefCollection>
      <ReceivePortCollection>
        <ReceivePort Name=”RecvTrans401″ IsTwoWay=”false”> ,,physical port
          <ReceiveLocations>
            <ReceiveLocation Name=”RecvTrans401″>
              <Address>MQS://B/QM_B/C</Address>
              <PublicAddress />
              <Primary>true</Primary>
              <ReceiveLocationTransportType Name=”MQSeries” Capabilities=”15627″ ConfigurationClsid=”b0942470-a5a1-45af-8d01-27481b306441″ />
              <ReceiveLocationTransportTypeData>&lt;CustomProps&gt;&lt;AdapterConfig vt=”8″&gt;&amp;lt;Config xmlns:xsd=”http://www.w3.org/2001/XMLSchema” xmlns:xsi=”http://www.w3.org/2001/XMLSchema-instance”&amp;gt;&amp;lt;uri&amp;gt;MQS://B/QM_B/C&amp;lt;/uri&amp;gt;&amp;lt;queueDetails&amp;gt;B/QM_B/C&amp;lt;/queueDetails&amp;gt;&amp;lt;transactionSupported&amp;gt;yes&amp;lt;/transactionSupported&amp;gt;&amp;lt;dataOffsetForHeaders&amp;gt;yes&amp;lt;/dataOffsetForHeaders&amp;gt;&amp;lt;pollingInterval&amp;gt;60&amp;lt;/pollingInterval&amp;gt;&amp;lt;pollingUnit&amp;gt;seconds&amp;lt;/pollingUnit&amp;gt;&amp;lt;maximumBatchSize&amp;gt;100&amp;lt;/maximumBatchSize&amp;gt;&amp;lt;maximumNumberOfMessages&amp;gt;100&amp;lt;/maximumNumberOfMessages&amp;gt;&amp;lt;threadCount&amp;gt;2&amp;lt;/threadCount&amp;gt;&amp;lt;fragmentationSize&amp;gt;500&amp;lt;/fragmentationSize&amp;gt;&amp;lt;characterSet&amp;gt;none&amp;lt;/characterSet&amp;gt;&amp;lt;errorThreshold&amp;gt;10&amp;lt;/errorThreshold&amp;gt;&amp;lt;segmentation&amp;gt;none&amp;lt;/segmentation&amp;gt;&amp;lt;ordered&amp;gt;no&amp;lt;/ordered&amp;gt;&amp;lt;/Config&amp;gt;&lt;/AdapterConfig&gt;&lt;/CustomProps&gt;</ReceiveLocationTransportTypeData>
              <ReceivePipeline Name=”PipelineA.PipelineA” FullyQualifiedName=”PipelineA.PipelineA, PipelineA, Version=1.0.0.0, Culture=neutral, PublicKeyToken=ef98d6e5e930a67b” Type=”1″ /> ”pipeline
              <ReceivePipelineData xsi:nil=”true” />
              <Enable>false</Enable>
              <ReceiveHandler Name=”BizTalkServerApplication”>
                <TransportType Name=”MQSeries” Capabilities=”15627″ ConfigurationClsid=”b0942470-a5a1-45af-8d01-27481b306441″ />
              </ReceiveHandler>
            </ReceiveLocation>
          </ReceiveLocations>
          <SendPipelineData xsi:nil=”true” />
          <Authentication>0</Authentication>
          <Tracking>0</Tracking>
          <Transforms />
        </ReceivePort>
      </ReceivePortCollection>
    </BindingInfo>

    i can’t put image on my message i have the image on a other web site.

    in my pipeline i have only a shema.

     

    my  logical port PortReceiveControl it’s attach to a recieve inside this recieve i have a message.

    if i whant to have 2 recieve physical port i need to create a new logical port and new recieve ?? i can you the same pipeline? thanks

    in reply to: Process Memory Threshold #22050

    Hello All,

    All of you who are getting the 510 MB as there process Memory threshold when it is set at 25% is because the allowed Process Memory on 32 bit architecture is 2GB. So the 25% of 2 GB is 512 MB.

    Regardless of how much Ram you have in your System whether it is 1 GB or whether it is 12 GB. you will get 510 MB as the process memory threshold because of the Reason that 2 GB to individual processes is allowed on 32 bit architecture and 25% is not corresponds to the whole physical memory available in the system but only the 2 GB allowed memory to the process unless /3GB switch is used in the Boot.ini file. In that case 3 GB is accessible to processess.

     

     

     

     

    in reply to: Biztalk mapper – choose Nodes on value #22048

    Thanks, think I use a custm XSLT since it i s a lot of mappings. Then I just has to have the test for value once instead of for each mapping.

     

    – dag

    in reply to: help on port on biztalk 2004 #22047

    monday i put a image on my orchestration and my binding file.

     

    in reply to: help on port on biztalk 2004 #22046

    You can add another receive location to the receive port and use a different adapter and pipeline to receive the same message.

    By the way your English is much better than my French, which is limited to “Je ne comprends pas”

     

    in reply to: help on port on biztalk 2004 #22045

    i have already a orchestration with one recieve port mqserie and i whant ad one more port for use the same orchestration because they make the same thing. sorry for my english i talk french more.

    the physical recieve port mqserie go to a pipeline after go to the logical recieve port and go to the message obx a after on a orchetration.

    i whant add a physical port and make just a minimum of change.

     

    if you don’t understand i can but the Structure Binding File maybe monday but i change the name.

    in reply to: help on port on biztalk 2004 #22044

    Can you explain  what you you are trying to achieve

    in reply to: help on port on biztalk 2004 #22043

    it’s they possible have a exemple thanks

    in reply to: help on port on biztalk 2004 #22042

    it’s they possible to see a exemple how i can do that ? thanks

    in reply to: help on port on biztalk 2004 #22041

    it’s they possible to see a exemple? how i can do that? thanks

    Depends a lot on how the message was encrypted, so some information about how the message was received and how it is supposed to be decrypted is needed. What protocol is used to receive the message? What encryption mechanism is used?

    Do you have access to the message context from Biztalk? You should be able to get this from the admins. It may provide some useful information.

    It may be impossible to decrypt this message. SSL, for example uses the public/private keys from a certificate to negotiate a session symmetric key which is used for encryption/decryption. This key only lasts for the session and is then discarded.

    Even if the message is actually encrypted using the assymmetric keys in your certificate you will need the private key to decrypt. Encryption relies on the fact that only the holder of the key can decrypt, so messages are encrypted with the public key and decrypted with the private key.  Security is not as good when everyone with access to the public key (i.e. everyone) can decrypt your messages.

    in reply to: help on port on biztalk 2004 #22039

    What this diagram doesn’t show is the logical port binds to a physical port which can have multiple receive locations. You can have the same message type received on two different receive locations, both of which are in the same receive port. Binding links the logical port with the receive port, not the receive location.

    You can also bind multiple logical ports to the same physical port. i.e. two orchestrations can bind to the same receive port. In this case both orchestrations will receive a copy of the message.

    The connection between the physical and logical ports is done using a publish subscribe mechanism and is very extensible. The logical port will subscribe to messages with particular properties. When you bind a orchestration logical port to a physical port a subscription is created to accept all messages that match the message type of the activatable receive shape and have a ReceivePortID matching the receive port that is bound. You can also use direct bound ports so that you can specify your own subscription parameters if you need more flexibility.

    thanks for sharing your opinion.

    in reply to: Error consuming WCF service #22035

    I tried your suggested solution but now I get a different error. I’m not sure what I’m doing wrong.

    The adapter failed to transmit message going to send port “WcfSendPort_Service1_WSHttpBinding_IService1” with URL “http://localhost:8731/Design_Time_Addresses/PMI.Services.Synchronization/Service1/&#8221;. It will be retransmitted after the retry interval specified for this Send Port. Details:”System.InvalidOperationException: Unable to find match for inbound body path expression “/*[local-name()=’Fault’]/*[local-name()=’detail’]/* | /*[local-name()=’CompositeType’]/*” in message.

    at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfMarshaller.CreateBizTalkMessageStream(Message wcfMessage, IAdapterConfigInboundMessageMarshalling config)

    at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfMarshaller.CreateBizTalkMessage(IBaseMessageFactory messageFactory, IAdapterConfigInboundMessageMarshalling marshallingConfig, Message wcfMessage)

    at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)”.

    The service interface is as follows:

         [ServiceContract]

     

        public interface IService1

        {

            [OperationContract]

            string GetData(int value);

     

            [OperationContract]

            CompositeType GetDataUsingDataContract(CompositeType composite);

        }

     

        [DataContract]

        public class CompositeType

        {

            bool boolValue = true;

            string stringValue = “Hello “;

     

            [DataMember]

            public bool BoolValue

            {

                get { return boolValue; }

                set { boolValue = value; }

            }

     

            [DataMember]

            public string StringValue

            {

                get { return stringValue; }

                set { stringValue = value; }

            }

        }

     

     

Viewing 15 posts - 3,001 through 3,015 (of 9,648 total)