Forum Replies Created
-
AuthorPosts
-
September 21, 2009 at 8:48 AM in reply to: a listen with an activatable receive cannot have a timeout #23286
Hi,
Delay shapes pause the execution of your orchestration. I would suggest setting each delay shape to a minute or two (not an hour) if your orchestration will be receiving all 4 msgs within a reasonable timeframe. When all 4 msgs are received, set a flag that will break out of your loop shape. You should also have a counter to track how much time has elapsed (when you are looping through to listen on all 4 msgs), when that counter goes over 1 hour, set a condition to send out an error message and break out of the loop.
Good luck!
Daniel.
Hi,
We have a BizTalk application which implements integration with Peoplesoft. We have inherited this application which implements the following integration points:
– File published by Peoplesoft for BizTalk to collect (used for large batches)
– HTTP Post for BizTalk to send data to Peoplesoft
– Soap Adapter web services exposed for Peoplesoft to send events or small messages to BizTalk
If id been involved earlier in the project i would have evaluated the Peoplesoft adapter, but the stuff implemented above has been working fairly trouble free for ages. I think they key saving from the adapter would have been being able to generate schemas as some of them are quite complex.
There is a white paper which might help might be useful to you
http://download.microsoft.com/download/1/6/9/16968441-c6c8-4bd0-9410-5f4014bc61f0/peoplesoft.doc
Hi Daniel,
I got the solution for this.
the solution is we have to use the grouping and debatching concept.
Thank you…
September 20, 2009 at 11:33 PM in reply to: a listen with an activatable receive cannot have a timeout #23282Have a receive shape on the top of the orchestration that has message type of XMLDocument and set this to activate. this will now accept XML message of any kind and have your listen shape beneth this.
Hope that helps.
Cheers!!
Saurabh
Hi Daniel,
And first thank you very much, you are king of BizTalk.
I tested your solution and result is positive, now in output file I have German characters.
Once again thanks.
Regards,
Marko
September 18, 2009 at 3:09 PM in reply to: Web Service call hangs at Receive location everytime except first call #23280Did you ever find a solution? We have the same problem with our web service when it runs under the Visual Studio Development Server.
I’m talking about the non-BRE format. This XML are predefined by Customer containing set of rules.
The sample XML file below contains only few rules. It will be great if there is any way to convert XML file into BRE format XML programatically.
The sample XML file is as follows which contains some rules:<?xml version=”1.0″?>
<DataView Name=”CAQH Provider Application View” xmlns=”urn:GeoAccess.PDE.DataView”>
<Structure Table=”Provider” Alias=”” MaxInstances=”1″>
<Existence Type=”Required” MinInstances=”1″>
<Message>Please select your provider type.</Message>
</Existence>
<Field Name=”LastName” DateFormat=”Standard”>
<Mask HardRule=”true” StripMask=”false”>
<OutputMask />
<Message>Last name must consist of one or more letters.</Message>
<RegExpression>^([A-Za-z]+((\-|([\.’]?[ ]?))[A-Za-z]+)*\.?)|(“[A-Za-z]+((\-|([\.’]?[ ]?))[A-Za-z]+)*\.?”)$</RegExpression>
</Mask>
<Existence Type=”Required” MinInstances=”1″>
<Message>Please indicate your Last Name.</Message>
</Existence>
<Translations />
</Field>
<Field Name=”FirstName” DateFormat=”Standard”>
<Mask HardRule=”true” StripMask=”false”>
<OutputMask />
<Message>First name must consist of one or more letters.</Message>
<RegExpression>^([A-Za-z]+((\-|([\.’]?[ ]?))[A-Za-z]+)*\.?)|(“[A-Za-z]+((\-|([\.’]?[ ]?))[A-Za-z]+)*\.?”)$</RegExpression>
</Mask>
<Existence Type=”Required” MinInstances=”1″>
<Message>Please enter your First Name</Message>
</Existence>
<Translations />
</Field>
<Field Name=”MiddleName” DateFormat=”Standard”>
<Mask HardRule=”true” StripMask=”false”>
<OutputMask />
<Message>Middle name must consist of one or more letters.</Message>
<RegExpression>^([A-Za-z]+((\-|([\.’]?[ ]?))[A-Za-z]+)*\.?)|(“[A-Za-z]+((\-|([\.’]?[ ]?))[A-Za-z]+)*\.?”)$</RegExpression>
</Mask>
<Translations />
</Field>
<Field Name=”BirthDate” DateFormat=”Standard”>
<Minimum HardRule=”true” Op=”None” ArgType=”Value”>
<Operand>0</Operand>
<ArgValue>1/1/1900</ArgValue>
<Message>Your birth date must be January 1, 1900 or greater.</Message>
</Minimum>
<Existence Type=”Required” MinInstances=”1″>
<Message>Please enter your birth date.</Message>
</Existence>
<Translations />
</Field>
<Field Name=”SSN” DateFormat=”Standard”>
<Mask HardRule=”true” StripMask=”true”>
<OutputMask>###-##-####</OutputMask>
<Message>SSN must be 9 digits.</Message>
<RegExpression>^(({\d\d\d}-{\d\d}-{\d\d\d\d})|({\d\d\d}{\d\d}{\d\d\d\d}))$</RegExpression>
</Mask>
<Existence Type=”Required” MinInstances=”1″>
<Message>Please indicate your social security number.</Message>
</Existence>
<Translations />
</Field>
</Structure>
</DataView>September 18, 2009 at 8:58 AM in reply to: Evaluating on the amount of items returned in a message #23278Hi Grant,
To solve your problem, you can use a message debatching scenario and, inside a loop shape, count the number of debatched scenario messages, and construct your output message appropriately.
Daniel.
Hi,
Have you tried setting the Target charset to “Western-European(1252)” encoding in the Pipeline Component Properties of your Flat File Assembler and see if that works?
By the way, setting the code page settings in your schema has no effect on message construction and output, just for your information.
Good luck!
Daniel.
Yes you can use Biztalk Rule deployement tool by which u can Import rule if they were properly formatted
September 17, 2009 at 5:31 PM in reply to: Can we use Index Rebuild Maintenance task to defrag indexes for BizTalk Databases? #23272could you advice plz…
I like this solution, but if you map the scripting functoid to a value mapping functoid, what exactly is mapped to the value mapping functoid? The script bool value and what else? It needs two inputs. Also, where does that get mapped to?
Hi,
To initialize your message, declare a variable of type XmlDocument and load it with XML contents that conform to the schema of your message, let’s say something like the following (this is generic, by the way):
<ns0:TopNode xmlns:ns0=”Namespace”>
<ns0:Element1>SomeValue</ns0:Element1>
</ns0:TopNode>Then assign that variable to your message in a Message Assignment shape to initialize your message.
September 17, 2009 at 7:40 AM in reply to: Partner claims they are unable to use optional tags #23267Hi,
I don’t know if this is true about 2002, but we have a similar issue with one of our trading partners and had to remove the empty tags in the receive pipeline to stop such problems occurring (an empty numeric is obvisouly going throw errors).
Might be an option to prevent the need to change other parts of your system.
Cheers
Stu.
Hello, i have the same problem and my question is: what is the right way to initialize the message??
-
AuthorPosts