community-content

Forum Replies Created

Viewing 15 posts - 976 through 990 (of 9,648 total)
  • Author
    Posts
  • in reply to: Flat File Schema doesnt work #25187

    Hi Chris:

     

       Try using sequence group in your flat file schema structure and place row100, row105, row200 and row205 underneath that group, something like the following:

     

    Root

             row000 (mandatory;once per file. After this row there can be a lot of purchase-orders)

             sequence-group1 (Min Occurs: 1   /  Max Occurs: unbounded)

                       row100 (mandatory; once per order; containing orders-header data)

                       row105 (not mandatory; cann occure 0 to 5 times after row100; containing orders-header freetext information)

                       row200 (mandatory; unbounded per order; containing orders-line-data)

                       row205 (not mandatory; cann occure 0 to 5 times after row200; containing orders-line freetext information)

     

        Daniel.

     

    in reply to: Dynamic Send Ports- File Adapter #25186

    Hi DavidBZ,

     

      You probably have an older version of the orchestration assembly (DLL) in your GAC. Try uninstalling that, and re-install the newer version of the DLL in GAC using gacutil command.

     

       Daniel.

     

    in reply to: Flat File 2 XML #25185

    Hi Wolfgang,

     

       You are most likely looking to do message debatching inside a custom pipeline. Here’s a blog you can consult more information (though it was written for BizTalk 2006 but I think it’s still relevant for version 2009):

     

    http://geekswithblogs.net/benny/archive/2006/02/05/68249.aspx

     

       Cheers,

     

       Daniel.

     

    in reply to: Flat File Schema doesnt work #25184

    Hello Daniel,

    Thanks for the link.

    I had try to expand my flatfile schema and since then – it doesnt work 🙁

    Maybe I have a problem with putting the logic of the flatfile structure to the schema. Please take a look at this. The complete structure of the flatfile looks like this

    row000 (mandatory;once per file. After this row there can be a lot of purchase-orders)

    row100 (mandatory; once per order; containing orders-header data)

    row105 (not mandatory; cann occure 0 to 5 times after row100; containing orders-header freetext information)

    row200 (mandatory; unbounded per order; containing orders-line-data)

    row205 (not mandatory; cann occure 0 to 5 times after row200;
    containing orders-line freetext information)

    so the file can looks like this if there are 3 orders inside:

    000     sender      receiver

    100 order1

    105 The first textrow in order1

    105 the secon textrow in order1

    200     Line1   article1    qunatity1

    205 The first textrow in Line1

    200     Line2   article2    qunatity2

    100 order2

    200     Line1   article1    qunatity1

    200     Line2   article2    qunatity2

    100 order3

    105 The first textrow in order3

    200     Line1   article1    qunatity1

    Have you any Idea ?

    Chris

    in reply to: Dynamic Send Ports- File Adapter #25183

    Oh no, I was in a  mistake. The orchestration still doesn’t work… Now, i get the next error(I don’r know waht i’m doing wrong it cant’ be so difficult change a dynamic port….):

     

    Uncaught exception (see the ‘inner exception’ below) has suspended an instance of service ‘Din.Orche1(16c48ad0-ac2d-c955-c705-2b3414c16e32)’.
    The service instance will remain suspended until administratively resumed or terminated.
    If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
    InstanceId: a69fee76-f4a2-44e6-8976-dac925d99885
    Shape name: Send_1
    ShapeId: 202f3e11-0d37-4be8-afa2-822de30c988c
    Exception thrown from: segment 1, progress 11
    Inner exception: Failed while attempting to send message ‘Message_1’.
           
    Exception type: SendFailedException
    Source: Microsoft.XLANGs.BizTalk.Engine
    Target Site: Void WriteMessageState(Microsoft.BizTalk.Interop.IBTPEPInfoLookup, System.Guid, Microsoft.XLANGs.BaseTypes.XLANGMessage, Microsoft.XLANGs.Core.Segment, System.String, System.String, System.Collections.IList, Boolean, System.Collections.IList)
    The following is a stack trace that identifies the location where the exception occured

    in reply to: Dynamic Send Ports- File Adapter #25182

    Thanks!! It was that!

    It’s solved 😉

    in reply to: Flat File 2 XML #25181

    Hi Daniel,

    thanks a lot for your fast reply.

    I’m not sure if this a solution I’m looking for. I’m looking for a solution to loop through ONE textfile with multiple datasets in it. I’m new to BTS 2009, but is there no way in a pipeline to say something like that:

    Identifier (each row starts with it), value 1, value 2, value 3 …

    And when the disassambler (?) read the textfile it knows by each same identifier it has to build a new xml file. I think something like this should works fine for me – if BTS provides a method like this, does it? (So I wouldn’t need an Orchestration so far)

    Thanks

    Wolfgang  

    in reply to: Direct Binding with multiple receive ports #25180

    Hi ,

    Of course you can use the same direct bindings used in the orc2.

    In fact, you have an orc1 which send msg to the MessageBox (due to the direct binding).

    Then you have one or more subscipters who subscribe to the Msg (using Promoted Properties). In your case, you want that 2 orcs can receive the msg, so you have to build orc with receive shape and appropriate filter and msgType.

    That’s all!!!

    Regards,

    in reply to: Upgrade Master Secret Server Event ID 10728 #25178

    Hello Colin,

    I am having the same issue as you had. Can you please tell me what is the work around for below listed error. I have already updated the secret key with the new server name as example listed below.  you reply will be greatly appreciated

    <sso>
    <globalInfo>
    <secretServer>NewMSSServer</secretServer>
    </globalInfo>
    </sso>

    This version of the SSO server is not compatible with the SSO database. Please upgrade your master secret server.

    SQL Server Name: xli-biztalk

    SSO Database Name: SSODB

    SSO Database Version: 0.0

    Required Version: 3.0

    Jay

    [email protected]

    in reply to: Flat File 2 XML #25177

    Hi Wolfgang,

     

       Have you looked into calling a Receive pipeline inside your orchestration to achieve your goal? Here’s a BizTalkGurus blog on this subject:

    http://www.biztalkgurus.com/blogs/biztalk/archive/2005/06/16/How-To-Call-A-Receive-Pipeline-In-an-Orchestration.aspx

     

       Daniel.

     

    in reply to: Decide Shape Weirdness #25176

    Hi Daniel

    I tried that and much to my surprise it worked!  I think that originally I had made the DocumentID a promoted property.  It was not showing up in the intellisense (expression in an assignment shape) and then I ALSO did distinquished.  So it was both.  At that point the value was available for my email subject field but I also got the weird double messages. 

    This time it is ONLY distinquished and that is working correctly.  I get one email and the subject line is correct.

    I am learning not to do the “Quick Promotion” but rather open the promo dialog box and choose the type of promotion I want.

    Thanks much-much!!!!

    – Ziggy –

    in reply to: sequential number autogenerated by BizTalk #25174

    I think you are looking for the Cross Referencing functionality in Biztalk

     

    There is a blog post @ http://geekswithblogs.net/bloesgen/archive/2007/12/06/117452.aspx which talks about it.

    in reply to: Decide Shape Weirdness #25173

    Hi Ziggy,

     

       I assume that you promoted both fields as Promoted Properties. Have you tried promoting them as Distinguished Fields, since you seem to be just using them in the orchestration?

     

       I’m not sure if you can use Distinguished Fields in your scenario, but give it a try and see if that works. Btw, Distinguished Fields are more light-weight then Promoted Properties.

     

       Daniel.

     

    in reply to: Dynamic Send Ports- File Adapter #25172

    Hi,

     

       Based on the error messages that you are getting:

    “Failed to publish (send) a message in the batch. This is usually because there is no one expecting to receive this message. The published message could not be routed because no subscribers were found.“

     

       Check the send pipeline of your Dynamic Send port: what kind of pipeline are you using there? It should be XMLTransmit, since you are outputting an XML file.

     

       Daniel.

     

    Great Solution yaar, its working fine

Viewing 15 posts - 976 through 990 (of 9,648 total)