community-content

Forum Replies Created

Viewing 15 posts - 4,051 through 4,065 (of 9,648 total)
  • Author
    Posts
  • If you just want to set default values for the pipeline component properties then you can set them directly in the pipeline component code.  However, if you want to add the component into multiple pipelines and set different default values, then I don’t know if that works so well….

    Which adapter are you using?  Are you sure it is the SOAP envelope and not the body of the message?  SOAP envelopes from BizTalk are valid XML, so it shouldn’t matter whether the enelope contains namespace prefixes such as “eps”.  There is no way to set BTS 2002 envelope mode, and modifying the evelope is not an easy task.  Your best bet is to use the WCF-BasicHttp adapter (http://msdn.microsoft.com/en-us/library/bb246019.aspx).  If simply using the adapter doesn’t fix the issue, you have some ability to mofidy the envelope by writing a WCF message inspector (http://weblogs.asp.net/paolopia/archive/2008/02/25/handling-custom-soap-headers-via-wcf-behaviors.aspx).  You would need to use the WCF-Custom adapter to hook in a message inspector via a custom behavior.

    in reply to: How to automatically enable receive locations #20393

    Hi,

    You can use the Microsoft.BizTalk.ExplorerOM.dll which can be found under C:\Program Files\Microsoft BizTalk Server 2006

    Have a look at this; http://technet.microsoft.com/en-us/library/microsoft.biztalk.explorerom.aspx

    Basically you can work w/ any BizTalk artifacts and perform action on them.

    Regards,

    Marc Desjardins

     

     

    in reply to: Multiple destinations Mapping #20392

     Thanks, I tried it, however, with the destinations are FlatFile schemas, I dont know if this makes a difference,

    in reply to: Multiple destinations Mapping #20391

     You should be use a Looping funtoid between both root nodes.

    And check if the destination root is a (1, *) record, because if it isn’t you can’t make this assigment (sorry, not root, fied “node” in both sides must be (1, *) )

    Regards

    in reply to: Multiple destinations Mapping #20390

     [quote user="xurxofg"]

     Hi!

    You can use a Less Than|Greater Than and a Value Mapping functoid.  For example, for Age=10, if the value is les than 20, send true to the Value Mapping and it sends the Age to the destination. In other case return false and it doesn’t send.

    I hope that it can be useful

    Regards

    Xurxo Garcia – MCTS Biztalk Server 2006

    [/quote]

     Thanks for your reply, I knew that I will be using the Less or greater functoid, however, the problem is that my input schema may contain 30 records, and they may be distributed as follows:

    20 for the first destination schema (i.e <20)

    7 for the second destination schema (i.e >20 && <30)

    3 for the third schema (i.e. >30)

     

    I want to do this splitting in one map, and I tried it, only I get the first record mapped, and others doesn’t get mapped….

     

    in reply to: Multiple destinations Mapping #20389

     Hi!

    You can use a Less Than|Greater Than and a Value Mapping functoid.  For example, for Age=10, if the value is les than 20, send true to the Value Mapping and it sends the Age to the destination. In other case return false and it doesn’t send.

    I hope that it can be useful

    Regards

    Xurxo Garcia – MCTS Biztalk Server 2006

     Hi,

    I’m a newbie to Biztalk. I wanted to call a web service and so I had added reference to the web service but the XSD files for this web service are not generated. So, I decided to use Construct Message and Message Assignment shape to initialize my web request message from my incoming message data.(And then Send shape should send the Request Message to Request operation of web port.)

    I’m trying to assign to my Web Request message in the message assignment shape with this expression:

    WebRequest_doc.input_xml = InboundDoc.input_xml;

    Where

    WebRequest_doc is a message created in Orchestration View under messages with ‘Message Type’ pointing to request Type Name of web method. input_xml ‘s Object Type = Message part  with Type = System.String and ‘Message Body part = false’

    And InboundDoc is a message created in Orchestration View under messages with following Schema

    <?xml version=”1.0″ encoding=”utf-16″ ?>

    – <xs:element name=”ForEDM“>
    – <xs:annotation>
    – <xs:appinfo>
    – <b:properties>
      <b:property distinguished=”true“ xpath=”/*[local-name()=’ForEDM’ and namespace-uri()=’http://EDMIntegrationSchema.DocID’%5D/*%5Blocal-name()=’input_xml&#8217; and namespace-uri()=”]“ />
      </b:properties>
      </xs:appinfo>
      </xs:annotation>
    – <xs:complexType>
    – <xs:sequence>
      <xs:element name=”input_xml“ type=”xs:string“ />
      </xs:sequence>
      </xs:complexType>
      </xs:element>
      </xs:schema>
     
    But this does not work and I get this exception: Inner exception: The part ‘input_xml’ of message ‘WebRequest_doc’ contained a null value at the end of the construct block. 
    How should I initialize the message part ‘input_xml’ ?
    Thanks for your help in advance.
    Regards,
    Sharad

     

     

     

    in reply to: How to set MSMQ Label property to guid in Orchestration? #20386

    You need to use a dynamic send port to set the label property from an orchestration.  http://msdn.microsoft.com/en-us/library/aa560663.aspx.  I think the property you need to set is MSMQ.Label.  Since this is a dynamic send port, you won’t be able to configure any adapter properties through the BizTalk adminitration console, so you need to set all of the MSMQ context properties in the orchestration.

    in reply to: Biztalk installation on multi server #20385

    Here’s how it works:  Join the 2 SQL Servers into a cluster.  The cluster has a virtual address that is different from the individual nodes.  Point the 2 BizTalk servers at the virtual cluster address.  As for SSO, you should cluster the SSO master secret because it is a single point of failure for BizTalk.  This is commonly done on the SQL cluster.  You can download a very detailed install guide here:  http://www.microsoft.com/downloads/details.aspx?FamilyID=df2e8a88-fb23-49a4-9ac7-d17f72517d12&displaylang=en (Installing and Configuring BizTalk Server in a Multicomputer Environment).

    in reply to: Receive location shutdown during SSODB backup job #20379

    Sorry it turns out that I do not know how to read a backup log. The job finishes way before the error occurs – my bad! 

    in reply to: Receive Adapter Issue #20378

    When a Receive Adapter receives a message it is passed to a Receive Pipeline before going to the message box.

    The Receive Pipeline is the component that would do the De-Batching and therefore the above statement is still true.

    In the BizTalk Admin console you can check the “Enable Routing of Failed Messages” check-box and you can create an Orchestration to receive these messages. Set the Receive Shape Filter to ErrorReport.ErrorType == “FailedMessage”

    in reply to: can we decide Sender at Run time for send port? #20375

    Thank you very much for your help Russell,

    I will go through these documents.

    Once again, thank you.

    Siva

    in reply to: Messaging Instances #20373

    Thanks for the reply.

    I can’t suspend the active instances, but the idle instances are currently suspended.

    Cheers,

    Pedro, O Moleiro

     

    in reply to: SOAP Adapter Client Certificate Issue #20372

    Hi Amit,

    Could you solve this problem?I am having the same problem and I am desperately looking for a solution.Please let me know if you found out the solution…

    Hi Gurus,

    Any pointers on this

    Cheers

    Sri

Viewing 15 posts - 4,051 through 4,065 (of 9,648 total)