Home Page › Forums › BizTalk 2004 – BizTalk 2010 › Orchestration Binding files
- This topic has 2 replies, 1 voice, and was last updated 9 years, 10 months ago by
community-content.
-
AuthorPosts
-
-
June 4, 2009 at 2:03 PM #22580
I use the BTSTask utility in a command line script to deploy orchestrations. I have one that when run, it always knocks my receieve location out of commission. It changes the Receive pipeline to PassThroughReceive for a custom pipeline I use. I’ve looked in the binding file and can see nothing relating to the receive location. Anyone have any ideas?
-
June 4, 2009 at 11:01 PM #22584
Hi!
I might be missing an important point here or something but then I will stand corrected. As far as I can say, from reading your post, below is how you can proceed.
Check your binding-file. The Orchestration-declaration should look something like this (names changed and “…” replaced with important stuff ) with the receive port set.
<ModuleRef Name=”MyAssembly” Version=”…” Culture=”…” PublicKeyToken=”…” FullName=”…”>
<Services>
<Service Name=”MyOrchestration” State=”Started” TrackingOption=”…” Description=””>
<Ports>
<Port Name=”Rcv_Request” Modifier=”2″ BindingOption=”1″>
<SendPortRef xsi:nil=”true” />
<DistributionListRef xsi:nil=”true” />
<ReceivePortRef Name=”MyReceivePort” />
</Port>
</Ports>
<Roles />
<Host Name=”MyHost” NTGroupName=”MyADGroup” Type=”1″ Trusted=”true” />
</Service>
</Services>
<TrackedSchemas />
</ModuleRef>Your Receive port should also be in the bindings with pipeline set. Something lite this
<ReceivePortCollection>
<ReceivePort Name=”Rcv_Request” IsTwoWay=”…” BindingOption=”1″>
.
.
.
<TransmitPipeline Name=”MyPipeline” FullyQualifiedName=”…” Type=”…” TrackingOption=”…” Description=”” />If your bindings are faulty, just set everything up and export new ones.
Hope I answered your question.
//Niklas
-
June 5, 2009 at 7:13 AM #22590
I exported a new one and it looks okay … but it still knocks my receive port pipeline out of commission. This wreaks havoc with the my other orchestrations using this receive location. Here is the file: And thank you for your help …
<?xml version=”1.0″ encoding=”utf-8″?>
<BindingInfo xmlns:xsi=”http://www.w3.org/2001/XMLSchema-instance” xmlns:xsd=”http://www.w3.org/2001/XMLSchema” Assembly=”Microsoft.BizTalk.Deployment, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35″ Version=”3.5.1.0″ BindingStatus=”FullyBound” BoundEndpoints=”1″ TotalEndpoints=”1″>
<Timestamp>2009-06-05T08:57:05.5225895-05:00</Timestamp>
<ModuleRefCollection>
<ModuleRef Name=”My.Interface.Epak” Version=”2.0.0.0″ Culture=”neutral” PublicKeyToken=”c91624e33c501d09″ FullName=”My.Interface.Epak, Version=2.0.0.0, Culture=neutral, PublicKeyToken=c91625e68c501d09″>
<Services>
<Service Name=”My.Interface.Epak.EpakOrch” State=”Started” TrackingOption=”ServiceStartEnd MessageSendReceive OrchestrationEvents” Description=””>
<Ports>
<Port Name=”EpakReceivePort” Modifier=”2″ BindingOption=”1″>
<SendPortRef xsi:nil=”true” />
<DistributionListRef xsi:nil=”true” />
<ReceivePortRef Name=”HttpReceivePort” />
</Port>
</Ports>
<Roles />
<Host Name=”BizTalkServerApplication” NTGroupName=”MYDOMAIN\BizTalk Application Users” Type=”1″ Trusted=”false” />
</Service>
</Services>
<TrackedSchemas />
</ModuleRef>
</ModuleRefCollection>
<SendPortCollection />
<DistributionListCollection />
<ReceivePortCollection>
<ReceivePort Name=”HttpReceivePort” IsTwoWay=”false” BindingOption=”1″>
<Description xsi:nil=”true” />
<ReceiveLocations>
<ReceiveLocation Name=”HttpReceiveLocation”>
<Description xsi:nil=”true” />
<Address>/HttpReceive/BTSHTTPReceive.dll</Address>
<PublicAddress>http://localhost/HttpReceive</PublicAddress>
<Primary>true</Primary>
<ReceiveLocationServiceWindowEnabled>false</ReceiveLocationServiceWindowEnabled>
<ReceiveLocationFromTime>2000-01-01T05:00:00</ReceiveLocationFromTime>
<ReceiveLocationToTime>2000-01-01T04:59:59</ReceiveLocationToTime>
<ReceiveLocationStartDateEnabled>false</ReceiveLocationStartDateEnabled>
<ReceiveLocationStartDate>2007-05-17T00:00:00</ReceiveLocationStartDate>
<ReceiveLocationEndDateEnabled>false</ReceiveLocationEndDateEnabled>
<ReceiveLocationEndDate>2007-05-18T23:59:59</ReceiveLocationEndDate>
<ReceiveLocationTransportType Name=”HTTP” Capabilities=”387″ ConfigurationClsid=”1c56d157-0553-4345-8a1f-55d2d1a3ffb6″ />
<ReceiveLocationTransportTypeData><CustomProps><ReturnCorrelationHandle vt=”11″>-1</ReturnCorrelationHandle><ResponseContentType vt=”8″>text/xml</ResponseContentType><SuspendFailedRequests vt=”11″>0</SuspendFailedRequests><UseSSO vt=”11″>0</UseSSO><LoopBack vt=”11″>0</LoopBack></CustomProps></ReceiveLocationTransportTypeData>
<ReceivePipeline Name=”My.Interface.Common.Pipeline.MYApplicationPolicyPipeline” FullyQualifiedName=”My.Interface.Common.Pipeline.MyApplicationPolicyPipeline, My.Interface.Common.Pipeline, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4a048e49556e5c16″ Type=”1″ TrackingOption=”ServiceStartEnd MessageSendReceive PipelineEvents” Description=”” />
<ReceivePipelineData xsi:nil=”true” />
<SendPipeline xsi:nil=”true” />
<SendPipelineData xsi:nil=”true” />
<Enable>true</Enable>
<ReceiveHandler Name=”BizTalkServerIsolatedHost” HostTrusted=”false”>
<TransportType Name=”HTTP” Capabilities=”387″ ConfigurationClsid=”1c56d157-0553-4345-8a1f-55d2d1a3ffb6″ />
</ReceiveHandler>
</ReceiveLocation>
</ReceiveLocations>
<SendPipelineData xsi:nil=”true” />
<Authentication>0</Authentication>
<Tracking>0</Tracking>
<Transforms />
<RouteFailedMessage>false</RouteFailedMessage>
<ApplicationName>MyWinsApplication</ApplicationName>
</ReceivePort>
</ReceivePortCollection>
<PartyCollection />
</BindingInfo>
-
-
-
AuthorPosts
- The forum ‘BizTalk 2004 – BizTalk 2010’ is closed to new topics and replies.