Home Page › Forums › BizTalk 2004 – BizTalk 2010 › Could not enlist Send Port – Exception 0xC00CE558
- This topic has 1 reply, 1 voice, and was last updated 9 years, 10 months ago by
community-content.
-
AuthorPosts
-
-
June 16, 2009 at 3:59 AM #22667
Hi.
I have problem related to deployement with nant and Biztalk server. I have a solution with two send ports that shall call a web service. The web service is protected with https and basic authentication. First I deployed the solution with Biztalk deploy and created the nessasary ports. Then I exported the bindings and did som changes in the portbindings file so that I could use it as a portBindingsMaster xml. I used Textpad to change the file. Then I ran the nant deploy. The deploy was sucess but the application can not start due to that the send porta was not enlisted.
When I try to enlist the port in the admin console I get: Could not enlist Send Port ‘CallElsmartOrderStatusService’. Exception from HRESULT: 0xC00CE558 (Microsoft.BizTalk.ExplorerOM)
I can not find more information for this error message.
If I compare the generated portBindings file from nant to the export bindings file – it looks almost same.
Compare: (<)C:\work_dagefj\AXElsmart\AXElsmart.PortBindingsExport.xml (28441 bytes)
with: (>)C:\work_dagefj\AXElsmart\AXElsmart.PortBindings.xml (28713 bytes)148,150c148,152
< <ReceivePipelineData xsi:nil=”true” />
< <Tracking>0</Tracking>
< <Filter />
—
> <ReceivePipelineData xsi:nil=”true”>
> </ReceivePipelineData>
> <Tracking>0</Tracking>
> <Filter>
> </Filter>
191,193c193,197
< <ReceivePipelineData xsi:nil=”true” />
< <Tracking>0</Tracking>
< <Filter />
—
> <ReceivePipelineData xsi:nil=”true”>
> </ReceivePipelineData>
> <Tracking>0</Tracking>
> <Filter>
> </Filter>
223,225c227,231
< <ReceivePipelineData xsi:nil=”true” />
< <SendPipeline xsi:nil=”true” />
< <SendPipelineData xsi:nil=”true” />
—
> <ReceivePipelineData xsi:nil=”true”>
> </ReceivePipelineData>
> <SendPipeline xsi:nil=”true” />
> <SendPipelineData xsi:nil=”true”>
> </SendPipelineData>
257,259c263,267
< <ReceivePipelineData xsi:nil=”true” />
< <SendPipeline xsi:nil=”true” />
< <SendPipelineData xsi:nil=”true” />
—
> <ReceivePipelineData xsi:nil=”true”>
> </ReceivePipelineData>
> <SendPipeline xsi:nil=”true” />
> <SendPipelineData xsi:nil=”true”>
> </SendPipelineData>
291,293c299,303
< <ReceivePipelineData xsi:nil=”true” />
< <SendPipeline Name=”AE.Integration.Biztalk.AXElsmart.Pipelines.Snd_FiledropPassthruPipeline” FullyQualifiedName=”AE.Integration.Biztalk.AXElsmart.Pipelines.Snd_FiledropPassthruPipeline, AXElsmart.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=a4c34afd4b0d4edb” Type=”2″ TrackingOption=”ServiceStartEnd MessageSendReceive PipelineEvents” Description=”” />
< <SendPipelineData xsi:nil=”true” />
—
> <ReceivePipelineData xsi:nil=”true”>
> </ReceivePipelineData>
> <SendPipeline Name=”AE.Integration.Biztalk.AXElsmart.Pipelines.Snd_FiledropPassthruPipeline” FullyQualifiedName=”AE.Integration.Biztalk.AXElsmart.Pipelines.Snd_FiledropPassthruPipeline, AXElsmart.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=a4c34afd4b0d4edb” Type=”2″ TrackingOption=”ServiceStartEnd MessageSendReceive PipelineEvents” Description=”” />
> <SendPipelineData xsi:nil=”true”>
> </SendPipelineData>I to edit the portbindings file to do them excatly the same – it works! So the error is caused by the changes nant does to the file.I have not yet investigated which of the changes that cause the error.
Someone know nant well enough to point me in the right direction?
Best regards Dag
-
June 22, 2009 at 10:20 PM #22709
It could be caused by the hidden newline characters \r\n in the manually edited XML binding file.
————————————————————————–
148,150c148,152
< <ReceivePipelineData xsi:nil=”true” />
< <Tracking>0</Tracking>
< <Filter />
—
> <ReceivePipelineData xsi:nil=”true”>\r\n
> </ReceivePipelineData>
> <Tracking>0</Tracking>
> <Filter>\r\n
> </Filter>
191,193c193,197
< <ReceivePipelineData xsi:nil=”true” />
< <Tracking>0</Tracking>
< <Filter />
—
> <ReceivePipelineData xsi:nil=”true”>\r\n
> </ReceivePipelineData>
> <Tracking>0</Tracking>
> <Filter>\r\n
> </Filter>
223,225c227,231
< <ReceivePipelineData xsi:nil=”true” />
< <SendPipeline xsi:nil=”true” />
< <SendPipelineData xsi:nil=”true” />
—
> <ReceivePipelineData xsi:nil=”true”>\r\n
> </ReceivePipelineData>
> <SendPipeline xsi:nil=”true” />
> <SendPipelineData xsi:nil=”true”>\r\n
> </SendPipelineData>
257,259c263,267
< <ReceivePipelineData xsi:nil=”true” />
< <SendPipeline xsi:nil=”true” />
< <SendPipelineData xsi:nil=”true” />
—
> <ReceivePipelineData xsi:nil=”true”>\r\n
> </ReceivePipelineData>
> <SendPipeline xsi:nil=”true” />
> <SendPipelineData xsi:nil=”true”>\r\n
> </SendPipelineData>
291,293c299,303
< <ReceivePipelineData xsi:nil=”true” />
< <SendPipeline Name=”AE.Integration.Biztalk.AXElsmart.Pipelines.Snd_FiledropPassthruPipeline” FullyQualifiedName=”AE.Integration.Biztalk.AXElsmart.Pipelines.Snd_FiledropPassthruPipeline, AXElsmart.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=a4c34afd4b0d4edb” Type=”2″ TrackingOption=”ServiceStartEnd MessageSendReceive PipelineEvents” Description=”” />
< <SendPipelineData xsi:nil=”true” />
—
> <ReceivePipelineData xsi:nil=”true”>\r\n
> </ReceivePipelineData>
> <SendPipeline Name=”AE.Integration.Biztalk.AXElsmart.Pipelines.Snd_FiledropPassthruPipeline” FullyQualifiedName=”AE.Integration.Biztalk.AXElsmart.Pipelines.Snd_FiledropPassthruPipeline, AXElsmart.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=a4c34afd4b0d4edb” Type=”2″ TrackingOption=”ServiceStartEnd MessageSendReceive PipelineEvents” Description=”” />
> <SendPipelineData xsi:nil=”true”>\r\n
> </SendPipelineData>
-
-
AuthorPosts
- The forum ‘BizTalk 2004 – BizTalk 2010’ is closed to new topics and replies.